- Server Center
- Contact Us
STO ENGINEERING GMBH
ADD: AM WINGERSBUCKEL16,
TEL: + 49 6068 759 90 90
FAX: + 49 6068 759 90 91
JINAN STO MACHINERY
ADD: DOUGOU OFFICE,
DISTRICT, JINAN, SHANDONG,
TEL: + 86 531 8896 3393
FAX: + 86 531 8896 3393
STO MEXICO S DE RL DE
ADD: CUARTA CALLE #114, COI.
LEON XIII, GUADALUPE, NUEVO
LEON, MEXICO,CP. 67210
TEL: + 52 81 18780286
It is designed specially for high speed cutting the laminated insulating paperboard and the laminated electrical plywood.
I.The main technical parameters
The Max.processing length 4200mm
The Max.processing thickness 100mm
The sawing speed VVVF
The diagonal accuracy error of the work-piece's dimensional precision 1000×1000mm ±1mm
The error within 1000mm of the saw bite straightness ±0.5mm
The rpm of the saw spindle 3000r/min (approximately)
II．The main performance requirements
1. There is no colonization on the processing surface of the work-piece ,and smooth without obvious tool marks.
2. The work-piece is placed horizontally on the feeding table and positioned and clamped by a claw before feeding.
3. The saw blade is made by hard alloy imported from Italy, which works in the closed condition during the whole sawing.
4. The saw blade is totally closed for protection and equipped with dust collecting device.
5. The sawing head part is running with the linear guide ,the guide of the feeding frame and the guide of the cutting mainframe keeps vertical.
6. The main structural component is processed by VSR, and the main driving components are heat treated as per the provisions.
7. Each operating handles runs flexibly without any blockade and sticking.
8. The work-piece is clamped pneumatically.
9. The electrical part: to feed and cut by PLC control,and the accurate feeding controlled by the servo motor.The step-less speed is by the frequency converter.
10. The converter, PLC,touch screen and electrical parts are all selected with the world famous brands.
11. There are the induction switch located at the terminal of cutting and feeding to prevent offside,and the mechanical stopper followed for the secondary anti offside.
12. There are the intermediate stop button/situ parked button on the operation panel. The intermediate stop button is selected when the sheet is shorter to shorten idle motion ,save time and improve efficiency.
13. There is a touch screen on the operation panel into which many group of feeding width can be input, and each group can set any number for one time. The machine will close down until all the cutting is finished.
14. The clamping claw for automatic feed is positioned by the servo control,and can be moved by certain distance , at this moment it can also be used as keep-off.
15. The machine can be stop automatically when the pressure is insufficient due to equipped with the owe pressure protection device.
16. The emergency stop button can be pressed in case of accident happens and the machine is all power failure.
17. The PLC control
The whole cutting for the CNC horizontal sawing machine is controlled by PLC.
to execute the next feeding and stops until all the cycle is finished.